EN 438-7: 2005 High-pressure decorative laminates (HPL) – Sheets based on thermosetting resins (Usually called Laminates) – Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes.
装饰用高压层压板材(HPL)-基于热固性树脂的薄板材（通常称为层压板材） - 内墙外墙和天花板装饰用压实层压
CE认证流程：
1.产品范围
This document specifies the health, safety and energy saving requirements for:
• Compact laminate panels/sidings for interior wall and ceiling finishes (including suspended ceilings);
• HPL composite panels/sidings for interior wall and ceiling finishes (including suspended ceilings);
• Compact laminate panels/sidings for exterior wall and ceiling finishes (including suspended ceilings);
• HPL composite panels/sidings for exterior wall and ceiling finishes (including suspended ceilings).
此文档规定健康、安全和节能的要求：
用于室内墙板和天花板用压缩层压板（包括吊顶）
用于室内墙板和天花板用HPL复合板（包括吊顶）
用于室外墙板和天花板用压缩层压板（包括吊顶）
用于室外墙板和天花板用HPL复合板（包括吊顶）
The scope of this document does not cover:
a) overlaid or veneered wood-based panels where the overlay/veneer is not HPL;
b) HPL-surfaced wood-based panels intended for use as structural components. These products are covered by EN 13986 (wood-based panels for use in construction).
该文档不覆盖如下产品：
a)叠加和胶合木质板，叠加/胶合不是HPL
b)HPL –结构用途的抛光木质板材。这些产品属于EN13986
2. CE认证需符合法规：
欧盟建材法规 Construction Products Regulation (EU) No 305/2011
3. CE认证测试协调标准
EN 438-7: 2005 High-pressure decorative laminates (HPL) – Sheets based on thermosetting resins (Usually called Laminates) – Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes.
装饰用高压层压板材(HPL)-基于热固性树脂的薄板材（通常称为层压板材） - 内墙外墙和天花板装饰用压实层压板
4. CE认证操作模式
模式1 欧盟授权公告号机构测试+工厂生产控制审核
模式3 欧盟授权公告号机构测试，工厂生产控制
模式4 初始型式测试，工厂生产控制
5. CE认证测试项目指标：
EN 13501-1 Reaction to fire 对火的反应
EN 13501-2 Fire resistance 耐火性
EN 438-7 4.4 Water vapour permeability 透湿性
EN 438-7 4.5 Resistance to fixings
EN 438-7 4.6 Direct airborne sound insulation 隔音
EN 438-7 4.7 Bonding strength 粘结强度
EN 438-7 4.8 Flexural tensile strength 弯曲抗拉强度
EN 438-7 4.9 Thermal resistance/Conductivity 热阻/电导率
EN 438-7 4.10.1 Content of pentachlorophenol 五录苯酚含量
EN 438-7 4.11.1 Release of formaldehyde 甲醛释放量
EN 438-7 4.11.2 Sound absorption 吸音
EN 438-7 4.12.1 Thermal shock resistance 耐热震性
EN 438-7 4.13.3 Durability 耐久性
6. Factory production control (FPC) 工厂生产控制
.1 General 通用
.2 Equipment设备
.3 Raw materials and components 原材料和组件
.4 Product testing and evaluation 产品测试和评估
.5 Inspection and testing status 检查和试验状态
.6 Traceability 可追溯性
7. ITT (初始型式测试)和FPC Inspection (工厂生产控制审核) ，欧盟公告号机构颁发CE证书
8. CE认证技术文件编辑 (标签，DOP（Declaration of performance）性能声明等)
9. 在产品包装上加贴CE标签，并出口产品到目的国家
