编号中文名称英文名称
EN 13411-5-2003 钢丝绳终端设备 安全性 第5部分：U型螺栓丝夹 Terminations for steel wire
ropes - Safety - Part 5: U-bolt wire rope grips
EN 1450-1996+A1-1998 塑料管道系统 玻璃增强热固塑料(GRP)组件 螺栓法兰连接的设计查验试验方法 Plastics
piping systems - Glass-reinforced thermosetting plastics (GRP)
components - Test methods to prove the design of bolted flange
joints
EN 1515-1-1999 法兰和其连接件 螺栓连接 第1部分：螺栓连接的选择 Flanges and their joints -
Bolting - Part 1: Selection of bolting
EN 1515-2-2001 法兰和其连接件 螺栓连接 第2部分：PN钢法兰用螺栓材料的分类 Flanges and their
joints - Bolting - Part 2: Classification of bolt materials for
steel flanges, PN designated
EN 1665-1997+AC-1998 六角法兰螺栓 重型系列 Hexagon bolts with flange - Heavy
series
EN 20225-1991 紧固件 螺栓、螺柱和螺母 尺寸代号和标注 Fasteners; Bolts, screws, studs
and nuts; Symbols and designation of dimensions (ISO 225:1983)
EN 20273-1991 紧固件 螺栓和螺钉用通孔 Fasteners; Clearance holes for bolts and
screws (ISO 273:1979)
EN 20898-7-1995 紧固件机械性能 第7部分：螺栓与螺钉的扭矩试验和最小扭矩公称直径1MM—10MM Mechanical
properties of fasteners - Part 7: Torsional test and minimum torques
for bolts and screws with nominal diameters 1mm to 10mm (ISO
898-7:1992)
EN 2357-1988 航空航天系列 操纵缆绳上锻制耐腐蚀钢柱头螺栓端 尺寸和负载 Aerospace series -
Stud-ends in corrosion resisting steel swaged on type, control cable
- Dimensions and loads
EN 24015-1991 六角头螺栓 产品等级B级 细杆(杆径近似等于中径) Hexagon head bolts; Product
grade B; Reduced shank (shank diameter = pitch diameter) (ISO
4015:1979)
EN 2413-1995 航空航天系列 镀镉合金钢制肩薄六角头高精度公差柄短螺纹螺栓 分类：1100MPa(在环境温 度下)/235℃
Aerospace series - Bolts, shouldered, thin hexagonal head, close
tolerance shank, short thread, in alloy steel, cadmium plated -
Classification: 1100 MPa (at ambient temperature)/235℃
EN 2549-1995
航空航天系列 阳极氧化MOS2润滑的钛合金制普通六角头紧公差标准柄短螺纹螺栓 等级：1100MPa（环境温度）/ Aerospace
series - Bolts, normal hexagonal head, close tolerance normal shank,
short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated
- Classification: 1100 MPa (at ambient temperature)/315℃
EN 2583-1997 航空航天系列 NI-PH2601(铬镍铁合金718)耐热镍基合金MJ螺纹螺栓 等级：1275MPa(
环境温度)/650℃ 技术规 Aerospace series - Bolts, MJ threads, in heat
resisting nickel base alloy NI-PH2601 (Inconel 718) -
Classification: 1275 MPa (at ambient temperature)/650℃ - Technical
specification
EN 26157-1-1991 紧固件 表面缺陷 第1部分：螺栓、螺钉和螺柱一般要求 Fasteners; surface
discontinuities; Part 1: Bolts, srews and studs for general
requirements (ISO 6157-1:1988)
EN 26157-3-1991 紧固件 表面缺陷 第3部分：螺栓、螺钉和螺柱的特殊要求 Fasteners; surface
discontinuities; part 3: bolts, srews and studs for special
requirements (ISO 6157-3:1988)
EN 2859-1995 航空航天系列 镀镉合金钢制标准六角头紧公差普通柄短螺纹螺栓 等级：1100 MPa (环境温度)/235℃
Aerospace series - Bolts, normal hexagonal head, close tolerance
normal shank, short thread, in alloy steel, cadmium plated -
Classification: 1100 MPa (at ambient temperature)/235℃
EN 2870-1996+AC-1996
航空航天系列 阳极氧化钛合金标准双六角头紧公差普通柄MoS2润滑的短螺纹螺栓 等级：1100MPa(环境温度)/31 Aerospace
series - Bolts, normal bihexagonal head, close tolerance normal
shank, short thread, in titanium alloy, anodized, MoS<(Index)2>
lubricated - Classification: 1100 MPa (at ambient temperature)/315℃
EN 2874-1996+AC-1996
航空航天系列 钝化、耐热镍基合金制双六角头紧公差普通柄中长螺纹螺栓 等级：1550MPa(环境温度)/315℃ Aerospace
series - Bolts, large bihexagonal head, close tolerance normal
shank, medium length thread, in heat resisting nickel base alloy,
passivated - Classification: 1550 MPa (at ambient temperature)/315℃
EN 28839-1991 紧固件机械性能 有色金属制造螺栓、螺钉、螺柱和螺母 Mechanical properties of
fasteners; Bolts, screws, studs and nuts made of non-ferrous metals
(ISO 8839:1986)
EN 2887-1995 航空航天系列 钝化耐腐蚀钢标准六角头螺全纹头螺栓 等级： 600 MPa( 环境温度)/425 ℃
Aerospace series - Bolts, normal hexagonal head, threaded to head,
in corrosion resisting steel, passivated - Classification: 600 MPa
(at ambient temperature)/425 ℃
EN 2888-1995 航空航天系列 钝纯化耐腐蚀钢标准六角头紧公差普通柄短螺纹螺栓 等级： 600 MPa(环境温度)/425 ℃
Aerospace series - Bolts, normal hexagonal head, coarse tolerance
normal shank, short threaded, in corrosion resisting steel,
passivated - Classification: 600 MPa (at ambient temperature)/425℃
EN 2889-1995 航空航天系列 镀镉合金钢标准六角头紧公差普通柄短螺纹螺栓 等级：900MPa (环境温度)/235℃
Aerospace series - Bolts, normal hexagonal head, coarse tolerance
normal shank, short threaded, in alloy steel, cadmium plated -
Classification: 900 MPa (at ambient temperature)/235 ℃
EN 2925-1994
航空航天系列 FE-PA92HT(A286)耐高温钢制长螺纹细柄双六角头螺栓 等级：900MPa(环境温度)650℃ Aerospace
series - Bolts, double hexagon head, relieved shank, long thread, in
heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at
ambient temperature)/650℃
EN 2931-1994
航空航天系列 FE-PA92HT(A286)耐热钢制长螺纹细柄T形头螺栓 等级：900MPa(环境温度)650℃ Aerospace
series - Bolts, T-head, relieved shank, long thread, in heat
resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at
ambient temperature)/650 ℃
EN 2932-1996 航空航天系列 FE-PA92HT(A286)耐热钢镀银长螺纹细螺柄T形头螺栓 级等： 900
MPa(环境温度)/650℃ Aerospace series - Bolts, T-head, relieved shank,
long thread, in heat resisting steel FE-PA92HT (A286), silver plated
- Classification: 900 MPa (at ambient temperature)/650 ℃
EN 2933-1996 航空航天系列 NI-P100HT718)耐热镍基合金镀银长螺纹细螺柄T形头螺栓 等级：1275
MPa(环境温度)/650℃ Aerospace series - Bolts, T-head, relieved shank,
long thread, in heat resisting nickel base alloy NI-P100HT (Inconel
718) - Classification: 1275 MPa (at ambient temperature)/650 ℃
EN 2934-1996 航空航天系列 合金NI-P100HT((铬镍铁合金718)耐热镍基镀银长螺纹细螺柄T形头螺栓 等级：1275
MPa(环境温 Aerospace series - Bolts, T-head, relieved shank, long
thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718),
silver plated - Classification: 1275 MPa (at ambient
temperature)/650 ℃
EN 2935-1996 航空航天系列 NI-P101HT(沃斯帕洛尹合金)耐热镍基合金镀银长螺纹细螺柄T形头螺栓 等级：1210
MPa(环境温 Aerospace series - Bolts, T-head, relieved shank, long
thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) -
Classification: 1210 MPa (at ambient temperature)/730℃
EN 2936-1996 航空航天系列 合金NI-P101HT(沃斯帕洛尹合金)耐热镍基镀银长螺纹细螺柄T形头螺栓 等级：1210
MPa(环境温 Aerospace series - Bolts, T-head, relieved shank, long
thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy),
silver plated - Classification: 1210 MPa (at ambient
temperature)/730℃
EN 3006-1994 航空航天系列 FE-PA92HT(A286)耐热钢制细柄长螺纹六角头螺栓 等级：900MPa（环境温
度）650 ℃ Aerospace series - Bolts, hexagon head, relieved shank, long
thread, in heat resisting steel FE-PA92HT (A286) - Classification:
900 MPa (at ambient temperature)/650℃
EN 3008-1998 航空航天系列 NI-P100HT(铬镍铁合金718)
耐热镍基合金长螺纹细柄六角头螺栓 等级：1275MPa(环境温度)/650 Aerospace series - Bolts,
hexagon head, relieved shank, long thread, in heat resisting nickel
base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at
ambient temperature)/650℃
EN 3010-1998
航空航天系列 NI-P101HT(沃斯帕洛尹合金)耐热镍基合金长螺纹细柄六角头螺栓 等级：1210MPa(环境温度)/730
Aerospace series - Bolts, hexagon head, relieved shank, long thread,
in heat resisting nickel base alloy NI-P101HT (Waspaloy) -
Classification: 1210 MPa (at ambient temperature)/730℃
EN 3011-1998
航空航天系列 镀银NI-P101HT(沃斯帕洛尹合金)耐热镍基合金长螺纹细柄六角头螺栓 等级：1210MPa(环境温度)
Aerospace series - Bolts, hexagon head, relieved shank, long thread,
in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver
plated - Classification: 1210 MPa (at ambient temperature)/730℃
EN 3052-1993 航空航天系列 钝化耐热及耐腐蚀钢标准六角头紧公差普通杆短螺纹螺栓 等级：1100MPa(环境温度)/425℃
Aerospace series; bolts, normal hexagonal head, close tolerance
normal shank, short thread, in heat and corrosion resisting steel,
passivated; classification: 1100 MPa (at ambient temperature)/425℃
(includes amendment A1:1993)
EN 3063-1994 航空航天系列 NI-P101HT耐热钢镍基合金制中螺纹紧公差柄双六角头螺栓 等级：
1210MPa(环境温度)730℃ Aerospace series - Bolts, double hexagon head,
close tolerance shank, medium length thread, in heat resisting
nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa
(at ambient temperature)/730℃
EN 3112-1995 航空航天系列 镀镉合金钢全螺纹头标准六角头螺栓 分级：大气压为900 MPa（环境温度） 235 ℃
Aerospace series - Bolts, normal hexagonal head, threaded to head,
in alloy steel, cadmium plated - Classification: 900 MPa (at ambient
temperature)/235℃
EN 3202-1995 航空航天系列 T形头螺栓的孔和阱 设计标准 Aerospace series - Holes and
traps for T-head bolts - Design standard
EN 3379-1996 航空航天系列 合金NI-P101HT(Waspaloy
一种耐高温热镍基合金)耐热镍基中长螺纹紧公差柄双六角螺栓 等级： Aerospace series - Bolts, double
hexagon head, close tolerance shank, medium length thread, in heat
resisting nickel base alloy NI-P101HT (Waspaloy), for increased
height nuts - Classification: 1210 MPa (at ambient temperature)/730℃
EN 3724-2003 航空航天系列 钛合金TI-P64001 MoS2润滑细柄长螺纹双六边头螺栓 等级： 1100 MPa
(环境温度) Aerospace series - Bolts, double hexagon head, relieved
shank, long thread, in titanium alloy TI-P64001, MoS<(Index)2>
coated - Classification: 1 100 MPa (at ambient temperature) / Note:
To be replaced by prEN 3724 (2003-05).
EN 3725-2003 航空航天系列 钛合金 TI-P640001 MoS2润滑盘头六瓣槽普通柄长螺纹螺栓 等级：1100
MPa（环境温度） Aerospace series - Bolts, pan head, six lobe recess,
normal shank, long thread, in titanium alloy TI-P64001,
MoS<(Index)2> coated - Classification: 1 100 MPa (at ambient
temparature) / Note: To be replaced by prEN 3725 (2003-05).
EN 3740-1996
航空航天系列 阳极氧化MoS2润滑钛合金短螺纹紧公差柄薄六角头带肩螺栓、等级：1100MPa(环境温度）/315℃ Aerospace
series - Bolts, shouldered, thin hexagonal head, close tolerance
shank, short thread, in titanium alloy, anodized, MoS<(Index)2>
lubricated - Classification: 1100 MPa (at ambient temperature)/315℃
EN 3818-2003 航空航天系列 TI-P640001钛合金带MJ螺纹用螺栓 等级： 1100 MPa（环境温度） 技术规范
Aerospace series - Bolts with MJ threads, in titanium alloy
TI-P64001 - Classification: 1 100 MPa (at ambient temperature);
Technical specification / Note: To be replaced by prEN 3818
(2003-05).
EN 3832-2003 航空航天系列 NI-P100HT (Inconel 718)耐热镍基合金、
双六角头细柄长螺纹螺栓 等级：1550 MPa（环境温 Aerospace series - Bolts, double hexagon
head, relieved shank, long thread, in heat resisting nickel base
alloy NI-P100HT (Inconel 718) - Classification: 1550 MPa (at ambient
temperature)/650℃ / Note: To be replaced by prEN 3832 (2003-05).
EN 3833-2003 航空航天系列 NI-PH2601 (Inconel 718)耐热镍基合金、 MJ螺纹螺栓 等级：1550
MPa（环境温度）650 ℃ Aerospace series - Bolts, MJ threads, in heat
resisting nickel base alloy NI-PH2601 (Inconel 718) -
Classification: 1550 MPa (at ambient temperature)/650℃; Technical
specification / Note: To be replaced by prEN 3833 (2003-05).
EN 3907-2003 航空航天系列 钛合金TI-P640001, MoS2润滑、双六角头普通柄长螺纹螺栓 等级：1100 MPa
(环境温度)/350℃ Aerospace series - Bolts, double hexagon head, normal
shank, long thread, in titanium alloy TI-P64001, MoS<(Index)2>
coated - Classification: 1 100 MPa (at ambient temperature)/350℃ /
Note: To be replaced by prEN 3907 (2003-05).
EN 4009-2003 航空航天系列 耐热镍基合金 NI-P100HT (Inconel 718)
双六角头紧公差柄中长螺纹螺栓 等级：1550 MPa (常 Aerospace series - Bolts, double
hexagon head, close tolerance shank, medium length thread, in heat
resisting nickel base alloy NI-P100HT (Inconel 718) -
Classification: 1550 MPa (at ambient temperature)/650℃ / Note: To be
replaced by prEN 4009 (2003-0
EN 4321-2003 航空航天系列 镀银耐热镍基合金 NI-PH2601 (Inconel
718)制 带安全锁线孔的细柄长螺纹双六角头螺栓 等级 Aerospace series - Bolts, double hexagon
head with lockwire holes, relieved shank, long thread, in heat
resisting nickelbase alloy NI-PH2601 (Inconel 718), silver plated -
Classification: 1550 MPa (at ambient temperature)/650℃ / Note: To be
replaced by
EN 4322-2003 航空航天系列 TI-P640001阳极氧化
MoS<(Index)2>涂层制钛合金、带安全锁线孔的细柄长螺纹双六角头螺栓 Aerospace series - Bolts,
double hexagon head with lockwire holes, relieved shank, long
thread, in titanium alloy TI-P64001, anodized, MoS<(Index)2> coated
- Strength class: 100 MPa (at ambient temperature) / Note: To be
replaced by prEN 4322 (2003-05).
EN 4352-2003 航空航天系列 MoS<(Index)2> 涂层制耐热镍基合金 NI-PH2601 (Inconel
718)、带安全锁线孔的细柄长螺纹双六 Aerospace series - Bolts, double hexagon head
with lockwire holes, relieved shank, long thread, in heat resisting
nickel base alloy NI-PH2601 (Inconel 718), MoS<(Index)2> coated -
Classification: 1550 MPa (at ambient temperature)/425℃ / Note: To be
rep
EN ISO 10664-1999 螺栓和螺钉用内板拧的六角花形 Hexalobular internal driving
feature for bolts and screws (ISO 10664:1999)
EN ISO 13918-1998 焊接 电弧螺栓焊用螺栓和陶瓷箍套 Welding - Studs and ceramic
ferrules for arc stud welding (ISO 13918:1998)
EN ISO 14555-1998 焊接 金属材料的电弧螺栓焊 Welding - Arc stud welding of
metallic materials (ISO 14555:1998)
EN ISO 3506-1-1997 耐腐蚀不锈钢紧固件的机械性能 第1部分：螺栓、螺钉和螺柱 Mechanical
properties of corrosion-resistant stainless-steel fasteners - Part
1: Bolts, screws and studs (ISO 3506-1:1997)
EN ISO 4014-2000 六角头螺栓 产品等级A和B级 Hexagon head bolts - Product grades
A and B (ISO 4014:1999)
EN ISO 4016-2000 六角头螺栓 产品等级C级 Hexagon head bolts - Product grade C
(ISO 4016:1999)
EN ISO 4759-1-2000 紧固件公差 第1部分：螺栓、螺钉、螺柱和螺母 产品等级A、B和C级 Tolerances for
fasteners - Part 1: Bolts, screws, studs and nuts; product grades A,
B and C (ISO 4759-1:2000)
EN ISO 4759-3-2000 紧固件公差 第3部分：螺栓、螺钉和螺母用平垫圈 产品等级A和C级 Tolerances for
fasteners - Part 3: Plain washers for bolts, screws and nuts -
Product grades A and C (ISO 4759-3:2000)
EN ISO 8765-2000 米制细牙六角头螺栓 产品等级A和B级 Hexagon head bolts with metric
fine pitch thread - Product grades A and B (ISO 8765:1999)
EN ISO 887-2000 米制普通螺栓、螺钉和螺母用平垫圈 总方案 Plain washers for metric bolts,
screws and nuts for general purposes - General plan (ISO 887:2000)
EN ISO 898-1-1999 碳钢和铸钢铸造的紧固件机械性能 第1部分：螺栓、螺钉和螺柱 Mechanical
properties of fasteners made of carbon steel and alloy steel - Part
1: Bolts, screws and studs (ISO 898-1:1999)
EN ISO 9974-1-2000 通用和液压传动用联接件 带ISO 261
弹性螺纹或金属 金属密封的气门和双头螺栓端头 第1部分：螺纹气门 Connections for general use and
fluid power - Ports and stud ends with ISO 261 threads with
elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO
9974-1:1996)
EN ISO 9974-2-2000 通用和液压传动用联接件 带ISO 261
弹性螺纹或金属 金属密封的气门和双头螺栓端头 第2部分：弹性密封的 Connections for general use and
fluid power - Ports and stud ends with ISO 261 threads with
elastomeric or metal-to-metal sealing - Part 2: Stud ends with
elastomeric sealing (type E) (ISO 9974-2:1996)
EN ISO 9974-3-2000 通用和液压传动用联接件 带ISO 261
弹性螺纹或金属 金属密封的气门和双头螺栓端头 第3部分：金属 金属 Connections for general use and
fluid power - Ports and stud ends with ISO 261 threads with
elastomeric or metal-to-metal sealing - Part 3: Stud ends with
metal-to-metal sealing (type B) (ISO 9974-3:1996)
prEN 10108-2000 冷成型螺母和螺栓用圆钢棒 尺寸和公差 Round steel rod for cold formed
nuts and bolts - Dimensions and tolerances
prEN 14399-1-2002 预加载高强度结构螺栓 第1部分：一般要求 High-strength structural
bolting for preloading - Part 1: General requirements
prEN 14399-2-2002 预加载高强度结构螺栓 第2部分：预加载适用性试验 High-strength structural
bolting for preloading - Part 2: Suitability test for preloading
prEN 14399-3-2002 预加载高强度结构螺栓 第3部分：HR系统 六角螺栓和螺母装配件 High-strength
structural bolting for preloading - Part 3: System HR; Hexagon bolt
and nut assemblies
prEN 14399-4-2002 预加载高强度结构螺钉 第4部分：HV系统 六角螺栓和螺母的装配件 High-strength
structural bolting for preloading - Part 4: System HV; Hexagon bolt
and nut assemblies
prEN 14420-3-2002 带夹具的软管配件 第3部分：销式或螺栓式夹具 Hose fittings with clamp
units - Part 3: Clamp units, pinned or bolted
prEN 2549-1999 航空航天系列 润滑电镀钛合金制的短螺纹精密配合公差标定柄标定六角头螺栓 等级：大气压为1100
MPa/（环 Aerospace series - Bolts, normal hexagonal head, close
tolerance normal shank, short thread, in titanium alloy, anodized,
MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient
temperature)/315℃
prEN 2859-1999 航空航天系列 镀镉合金钢标准六角头紧公差普通柄短螺纹螺栓 等级：1100MPa(环境温度)/235℃
Aerospace series - Bolts, normal hexagonal head, close tolerance
normal shank, short thread, in alloy steel, cadmium plated -
Classification: 1100 MPa (at ambient temperature)/235℃
prEN 2888-1999 航空航天系列 钝化耐腐蚀钢普通六角头紧公差普通柄短螺纹螺栓 等级：600MPa (环境温度)/425℃
Aerospace series - Bolts, normal hexagonal head, coarse tolerance
normal shank, short thread, in corrosion resisting steel, passivated
- Classification: 600 MPa (at ambient temperature)/425℃
prEN 2889-1999 航空航天系列 镀镉合金钢标准六角头紧公差普通柄短螺纹螺栓 等级：900 MPa（环境温度）235 ℃
Aerospace series - Bolts, normal hexagonal head, coarse tolerance
normal shank, short thread, in alloy steel, cadmium plated -
Classification: 900 MPa (at ambient temperature)/235℃
prEN 3052-1999
航空航天系列 钝化耐热及耐腐蚀钢标准六角头紧公差普通杆短螺纹螺栓 等级：1100MPa(环境温度)/425℃ Aerospace
series - Bolts, normal hexagonal head, close tolerance normal shank,
short thread, in heat and corrosion resisting steel, passivated -
Classification: 1100 MPa (at ambient temperature)/425℃
prEN 3757-1998 航空航天系列 MoS2润滑耐热钢、自锁浮动自对中双耳系紧螺栓螺母 等级： 900
MPa(环境温度)/315℃ Aerospace series - Nuts, anchor, self-locking,
floating, self-aligning, two lug, in heat resisting steel,
MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient
temperature)/315℃
prEN 3820-1999 航空航天系列 阳极氧化MoS2润滑的钛合金、 标准六角头松公差普通柄短螺纹螺栓 等级：1100
MPa（环境温度 Aerospace series - Bolts, normal hexagonal head, coarse
tolerance normal shank, short thread, in titanium alloy, anodized,
MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient
temperature)/315℃
prEN 4071-1999 航空航天系列 铝 IVD涂层钛合金标准六角头紧公差普通柄短螺纹螺栓 等级：1100 MPa(环境温度)
/425℃ Aerospace series - Bolts, normal hexagonal head, close
tolerance normal shank, short thread, in titanium alloy, aluminium
IVD coated - Classification: 1100 MPa (at ambient temperature)/425℃
prEN 4127-1999 航空航天系列 钛合金铝 IVD涂层、标准六角头松公差普通柄短螺纹螺栓 等级：1100 MPa
(环境温度)/425 ℃ Aerospace series - Bolts, normal hexagonal head, coarse
tolerance normal shank, short thread, in titanium alloy, aluminium
IVDcoated - Classification: 1100 MPa (at ambient temperature)/425℃
prEN 4128-1999 航空航天系列 耐热镍基合金铝 IVD涂层、标准六角边头松公差普通柄短螺纹螺栓 等级：1250 MPa
(环境温度)/ Aerospace series - Bolts, normal hexagonal head, coarse
tolerance normal shank, short thread, in heat resisting nickel base
alloy, aluminium IVD coated - Classification: 1250 MPa (at ambient
temperature)/425℃
prEN 4172-1999 航空航天系列 阳极氧化耐钛合金TI-P64001制突出头剪式紧公差锁紧螺栓 米制 等级：：1100 MPa
(环境温度) Aerospace series - Lockbolts, protruding head, sheartype,
close tolerance, in titanium alloy TI-P64001, anodized, metric
series - Classification: 1100 MPa (at ambient temperature)/315℃
prEN 4173-1999
航空航天系列 阳极氧化耐钛合金TI-P64001、100°埋头孔普通头剪式紧公差锁紧螺栓 米制 等级：：1100 MPa
Aerospace series - Lockbolts, 100?countersunk normal head,
sheartype, close tolerance, in titanium alloy TI-P64001, anodized,
metric series - Classification: 1100 MPa (at ambient
temperature)/315℃
prEN 4176-1999
航空航天系列 阳极氧化或有铝色涂层钛合金TI-P64001、100°埋头标准头或突出头的张力剪式紧公差锁紧螺栓、 Aerospace
series - Lockbolts, 100?countersunk normal head or protruding head,
tension-sheartype, close tolerance, in titanium alloy TI-P64001,
anodized or with aluminium pigmented coating - Collars in titanium
TI-P99002 or aluminium alloy 2024 - Metric
prEN 4312-1999 航空航天系列 带铝色涂层制 耐热和耐腐蚀钢、松公差异径柄中等长度螺纹的双头螺栓 等级：1100 MPa
(常温 Aerospace series - Studs, coarse tolerance reduced shank, medium
length threads, in heat and corrosion resisting steel, with
aluminium pigmented coating - Classification: 1100 MPa (at ambient
temperature)/315℃
prEN 4401-1999 航空航天系列 米制有铝色涂层钛合金TI-P64001紧公差剪式突头锁紧螺栓 等级：1100 MPa
(常温)/315℃ Aerospace series - Lockbolts, protruding head, sheartype,
close tolerance, in titanium alloy TI-P64001, with aluminium
pigmented coating, metric series - Classification: 1100 MPa (at
ambient temperature)/315℃
prEN 4402-1999 航空航天系列 米制有铝色涂层钛合金TI-P64001紧公差剪式100度埋头标准头锁紧螺栓 等级：1100
MPa (常温)/ Aerospace series - Lockbolts, 100?countersunk normal head,
sheartype, close tolerance, in titanium alloy TI-P64001, with
aluminium pigmented coating, metric series - Classification: 1100
MPa (at ambient temperature)/315℃
prEN 4407-1997 航空航天系列 有IVD铝涂层的钛合金全螺纹头标准六角螺栓 等级：1100 MPa(常温)/315度
Aerospace series - Bolts, normal hexagonal head, threaded to head,
in titanium alloy, aluminium IVD coated - Classification: 1100 MPa
(at ambient temperature)/425℃
prEN 4421-2000 航空航天系列 带有耐腐钢齿形锁紧环的涂MoS2，TI-P64001钛合金双头螺栓 强度等级：1100
MPa(环境温度下) Aerospace series - Studs, in titanum alloy TI-P64001,
MoS<(Index)2> coated, with serrated locking ring, in corrosion
resisting steel - Strength class: 1100 MPa (at ambient temperature)
prEN 4458-2000
航空航天系列 带有耐腐钢齿形锁紧环的涂MoS2TI-P64001钛合金、MJ螺纹双头螺栓 强度等级：1100 MPa(环境温
Aerospace series - Studs, MJ threads, in titanium alloy TI-P64001,
MoS<(Index)2> coated, with serrated locking ring in corrosion
resisting steel - Strength class: 1100 MPa (at ambient temperature);
Technical specification
prEN 4459-2000 航空航天系列 带有耐腐钢齿形锁紧环的TI-P64001钛合金双头螺栓 设计标准 Aerospace
series - Studs, in titanium alloy TI-P64001, with serrated locking
ring in corrosion resisting steel - Design standard
prEN 4460-2000 航空航天系列 带有耐腐钢齿形锁紧环的TI-P64001钛合金双头螺栓 安装和拆卸程序 Aerospace
series - Studs, in titanium alloy TI-P64001, with serrated locking
ring in corrosion resisting steel - Installation and removal
procedure
prEN 4495-1999 航空航天系列 铝涂层阳极氧化钛合金紧公差标准体短螺纹 标准六角头螺栓 等级：1100 MPa
(环境温度下)/31 Aerospace series - Bolts, normal hexagonal head, close
tolerance normal shank, short thread, in titanium alloy, anodized,
with aluminium pigmented coating - Classification: 1100 MPa (at
ambient temperature)/315℃
prEN 4498-1999 航空航天系列 铝涂层钝化耐热镍基合金紧公差标准体中长螺纹大双头六角头螺栓 等级：1550 MPa
(环境温度下 Aerospace series - Bolts, large bihexagonal head, close
tolerance normal shank, medium length thread, in heat resisting
nickel base alloy, passivated, with aluminium pigmented coating -
Classification: 1550 MPa (at ambient temperature)/315℃
prEN 4501-1999 航空航天系列 铝涂层阳极氧化钛合金紧公差标准体短螺纹带肩薄六角头螺栓 等级：1100 MPa
(环境温度下)/31 Aerospace series - Bolts, shouldered, thin hexagonal
head, close tolerance shank, short thread, in titanium alloy,
anodized, with aluminium pigmented coating - Classification: 1100
MPa (at ambient temperature)/315℃
prEN 4506-1999 航空航天系列 规定条件下螺栓和螺帽间摩擦系数的测定 Aerospace series -
Determination of coefficients of friction of bolts and nuts under
specified conditions
prEN 6110-2000 航空航天系列 不锈钢100 平头盲螺栓 Aerospace series - Bolts, blind,
100?flush head, stainless steel
prEN 780-1992 宽平头高强度结构螺栓用六角螺母 产品等级B 性能级别8和10 Hexagon nuts for
high-strength structural bolting with large width across flats;
product grade B; property classes 8 and 10
prEN 781-1992 宽平头高强度结构螺栓用六角螺母（螺纹长度遵照ISO 888） 产品等级C 性能级别8.8和10.9
Hexagon bolts for high-strength structural bolting with large width
across flats (thread lengths according to ISO 888); product grade C;
property classes 8.8 and 10.9
prEN 782-1992 宽平头高强度结构螺栓用六角螺母（短螺纹长度） 产品等级C 性能级别10.9 Hexagon bolts
for high-strength structural bolting with large width across flats
(short thread length); product grade C; property class 10.9
prEN 783-1992 宽平头结构螺栓用六角螺母 类型1 产品等级B 性能级别10 Hexagon nuts for
structural bolting with large width across flats, style 1; product
grade B; property class 10
prEN 784-1995 高强度结构螺栓用平垫圈、硬度和韧度 Plain washers for high-strength
structural bolting, hardened and tempered
prEN 785-1995 高强度结构螺栓用平垫圈、导角、硬度和韧度 Plain washers, chamfered,
hardened and tempered for high-strength structural bolting
prEN ISO 10434-2002 石油和天然气工业用螺栓帽状钢闸阀 Bolted bonnet steel gate valves
for petroleum and natural gas industries (ISO/DIS 10434:2002)